12 Tools Under $20 Every Woodworker Needs

Subscribe to Fix This Build That on Youtube

If you’re a woodworker, then you know that having the right tools is essential to your success. Unfortunately, quality woodworking tools can be quite expensive. However, there are some great tools out there that cost under $20, and we’ve compiled a list of them for you!

In this blog post, we will discuss 12 woodworking tools that are all under $20! So whether you’re just starting out in the world of woodworking or you’re a seasoned pro, these tools are sure to come in handy!

Popular ArticlesFun Woodworking Trivia Quiz
3 Ways To Build Floating Shelves9 Scrap Wood Projects That Sell
21 Pallet Wood Projects5 Small Woodworking Tools Every Woodworker Can Use
174 Woodworking Tips And Tricks12 Tools Under $20 Every Woodworker Needs
Glue Squeeze Out Clean Up Trick Everyone Should Know20 Scrap Wood Project Ideas
25 Table Saw Jigs6 DIY Charcuterie Board Build Projects
8 Uses For Thin Strips Of Scrap WoodTable Saw Accessories
99% Of Woodworkers Don’t Know These 5 Tips and TricksSmall Projects That Sell

Want To Improve Your Woodworking? Discover 1,000 Hours Of Step-By-Step Woodworking Videos

Click Here To View

It’s called Woodwork101. A database of detailed videos and blueprints in crystal clear, mouth-watering HD that will take you by the hand and show you that DIY home projects done the right way are easy, fun, and always of top quality… turning dream into reality in a heart-beat. Getting you that perfect build each and every time.


9’ Tape Measure 3pack

Click Here To Check Price On Amazon

What Is A Magnetic Tape Measure Used For?

A magnetic tape measure is used to take linear measurements. The tape is held tight against the workpiece by a magnet, allowing you to get an accurate measurement without having to worry about parallax error. A magnetic tape measure can also be handy for taking measurements around curves.

What Is Folding Rule?

A folding rule, also known as a ruler or straight edge, is an instrument used in woodworking to measure the length of a board. It has a straight edge and is typically made from metal or plastic. Folding rules can be opened up to lie flat against the workpiece for accurate measurement, or closed up for easier storage and transportation. They are an essential tool for any woodworker.

What Is The End Of A Tape Measure Called?

The end of a tape measure is called the “tongue.” The tongue is used to lock the tape measure in place when measuring. It can also be helpful when trying to pull the tape measure out from behind something.

Pica Mechanical Pencil

Click Here To Check Price On Amazon

[Video] 3 Most Common Mistakes
When Setting Up Shop

Click Here To View

A woodworking friend of mine shared this video by Ralph Chapman with me that helped him set up his workshop. 

The video explains the benefits of Ralph Chapman’s guide about setting up an affordable workshop and avoiding the most common mistakes offers to anyone interested in woodworking.

What Is A Pica Pencil?

A pica pencil is a type of woodworking pencil that has a very thin lead. This makes it perfect for precision work, such as drawing lines on your project before you start cutting. Pica pencils are also great for marking measurements and other reference points on your wood. You can find them at most hardware stores or online. While they’re not expensive, they can be a bit hard to find, so don’t wait until the last minute to pick one up.

How Do You Use A Pica Pencil?

To use a pica pencil, first make sure that it is sharpened. Then, hold it against the workpiece and lightly press down on the point. The line that is created will be very thin, but it will be visible.

Pica pencils come in a variety of different sizes, so make sure to choose the right one for the job. If you are working on a small project, use a smaller pica pencil. If you are working on a large project, use a larger pica pencil.

Pica Lead Refills

Click Here To Check Price On Amazon

Flexible Tool with magnet

Click Here To Check Price On Amazon

What Is A Magnetic Pick Up Tool?

A magnetic pickup tool is a handy device that helps you to easily and quickly pick up small metal objects. This type of tool has a powerful magnet attached to it, which makes picking up nails, screws, or other small metal objects easy.

Telescoping Magnet tool

Click Here To Check Price On Amazon

174 Woodworking Tips & Tricks

Click Here To View

Can Magnets Pick Up Screws?

Yes – magnets can definitely pick up screws. In fact, using a magnet to pick up screws can be a great way to save time and hassle when you’re working on a project.

Spring Nail Set and Hinge Pin Tool

Click Here To Check Price On Amazon

What Is Hinge Tool?

A hinge tool is a must-have for any woodworker, especially those who work with smaller pieces of wood. This simple tool makes it easy to attach hinges without having to fumble with tiny screws or nails. It’s also perfect for repairing old hinges on furniture. The hinge tool is a small, metal rectangle that has two holes in it. One hole is for the screws or nails that hold the hinge in place, and the other hole is for the screw or nail that attaches the hinge to the wood.

How Do You Use A Hinge Pin Removal Tool?

Removing a hinge pin is one of the most basic tasks in woodworking, but it can be tricky if you don’t have the right tools. A hinge pin removal tool makes the process much easier and prevents damage to the pins or surrounding wood. Here’s how to use one:

-Insert the tool into the hole in the hinge

-Use the lever to pry out the pin

-If necessary, use a hammer to tap on the tool to help remove the pin

It’s also important to clean and lubricate the hinge pins after removal. This will help keep them functioning properly and prevent corrosion.

Auto Center Punch

Click Here To Check Price On Amazon

What Is An Automatic Center Punch Used For?

An automatic center punch is a handheld tool used to create indentations in materials like metal and wood. The purpose of an automatic center punch is to help guide a drill bit or other sharp object into the material, preventing it from slipping off-center. Automatic center punches typically have a pointed end and come in different sizes. They are also often called “scriber punches.”

What Is The Difference Between A Center Punch A Starting Punch And An Aligning Punch?

A center punch is used to mark the center of a hole. A starting punch is used to start a hole. An aligning punch is used to help keep holes aligned. All three punches are usually made out of steel. They all have different shapes, but they all do the same job. When you are using any of these punches, you need to make sure that you are using a hard surface. If you are not, the punches can easily break. You also need to make sure that you are hitting the punch with enough force. If you don’t, it will not work properly.

Spray Paint Trigger Handle

Click Here To Check Price On Amazon

How Do You Trigger Spray Paint?

Trigger spray paint cans are a must-have for any woodworker. They make it easy to apply an even coat of paint, which is important when you’re trying to achieve a high-quality finish. But how do you use them?

Here’s a quick guide on how to use trigger spray paint:

– Shake the can well before use.

– Hold the can about 12 inches away from the surface and spray in a steady motion.

– Apply several light coats, rather than one heavy coat. This will help to achieve an even finish.

How Do You Use A Spray Grip?

A spray grip is a tool used to hold and guide the spray gun while you are spraying. It gives you more control over the spray gun, which results in a better finished product. There are a few different ways to use a spray grip:

– With your palm facing down, place your thumb on top of the spray grip and wrap your four fingers around the bottom. This is the most common way to hold it, and it gives you the most control.

– Another option is to hold it with your palm facing up. Place your thumb and first two fingers on top of the spray grip, and wrap your other two fingers around the bottom. This gives you a little more stability and is good for larger projects.

– Finally, you can also hold the spray grip between your thumb and first two fingers like a pencil. This gives you the most mobility and is good for smaller projects.

No matter how you choose to hold it, make sure to keep your arm close to your body and use smooth motions when spraying.

Snap Off Utility Knife

Click Here To Check Price On Amazon

What Is A Utility Knife Called?

A utility knife is a tool that woodworkers use to cut materials. It has a sharp blade that can be extended or retracted. The most common type of utility knife is the retractable blade knife. This type of utility knife has a blade that is stored in the handle of the knife. When you need to use the blade, you pull the blade out of the handle. When you are finished using the blade, you push it back into the handle. Retractable blade knives are very safe to use because the blade is hidden in the handle when it is not in use.

What Can A Utility Knife Cut?

The humble utility knife is an extremely versatile tool in a woodworker’s shop. It can be used for everything from making delicate cuts to prying open stubborn wood joints.

Most utility knives have a standard blade that is around three inches long. This blade is capable of cutting through a variety of materials, including wood, cardboard, and plastic.

When using a utility knife to cut wood, it is important to use a slicing motion rather than a stabbing motion. This will help you avoid tearing the wood fibers.

You can also use a utility knife to make precision cuts in tight spaces. To do this, hold the blade at a 45-degree angle and make a slicing motion.

Utility knives can also be used to remove the bark from logs. To do this, score the bark with the blade and then use a chisel or screwdriver to pry it off.

10 Woodworking Tools Not To Buy

Click Here To View

Can You Sharpen A Utility Knife?

The answer is yes – you can definitely sharpen a utility knife! In fact, there are a few different ways to go about it.

One way to sharpen a utility knife is to use a sharpening stone. If you have a sharpening stone, all you need to do is hold the knife at a slight angle and sharpen it using gentle pressure.

Another way to sharpen a utility knife is to use a honing rod. To use a honing rod, simply slide the blade of the utility knife down the honing rod several times. Be sure to use gentle pressure and go in the same direction with each stroke.

You can also sharpen a utility knife using a diamond sharpener. This is probably the easiest way to sharpen a utility knife, as all you have to do is hold the blade at an angle and run it through the sharpener several times.

Ice Picks

Click Here To Check Price On Amazon

How Long Is An Ice Pick?

They can also be used as weapons. Ice picks range in length from six inches to twelve inches. Some models have retractable blades, while others do not.

What Is The Diameter Of An Ice Pick?

The diameter of an ice pick is typically between 0.25 and 0.75 inches.

Flush Trim Saw

Click Here To Check Price On Amazon

What Is A Trim Saw Used For?

A trim saw is a smaller handsaw that can be used for detailed woodworking projects. It has a thin blade and fine teeth, which makes it perfect for sawing intricate shapes and curves in wood. A trim saw is also great for making precision cuts, such as dovetails and miters.

Tongue Depressors

Click Here To Check Price On Amazon

Blunt Tip Syringes

Click Here To Check Price On Amazon

Recommended Resources:

woodworking resources
STOP Making Out-Dated Table Saw Sleds, Do This Instead