Subscriber to LRN2DIY on YouTube
Have you ever experienced the frustration of a stripped screw? It’s one of the most annoying things that can happen during a DIY project. But fear not, Nils from LRN2DIY has got you covered with four tips to prevent stripped screws from ever happening again.
Tip number one is to always use the proper size bit for the job. A common mistake is assuming that a Phillips screwdriver will work for any Phillips head screw, but the size of the screw head can vary. Nils demonstrates how using a blunt bit that fits snugly into the screw head can make all the difference. Tip number two is to get the proper angle of attack, ensuring that the screwdriver is lined up perfectly with the screw head to avoid slipping and stripping. Tip number three is to apply the proper pressure and torque to the screw, using a downward force and the right bit size. And if all else fails, tip number four is to use Tank Bond Liquid Grip, a product that adds extra grip to the screw head.
In summary, with Nils’ tips, you’ll never have to deal with stripped screws again. Always choose the right bit, get the proper angle of attack, apply the proper pressure, and use Tank Bond Liquid Grip when needed.
Choosing the Right Bit
Proper Size for the Screw
When it comes to preventing stripped screws, using the proper size bit is key. Even if a screw has a common Phillips head, using a screwdriver with a sharp and pointy tip may cause it to slip out as soon as torque is applied. It’s important to choose a bit with a blunt tip that fits snugly into the screw head. Testing out different sized bits is a great way to ensure the right fit.
Testing Bit Fit
To test the fit of a bit, simply insert it into the screw head and see if it holds tight. If it turns easily, then it’s a good fit. If not, try a different sized bit until you find the one that fits snugly into the screw head. It’s also important to make sure the bit is lined up properly with the screw shaft to prevent slipping or stripping.
Using Torx Bits
In addition to Phillips and flathead bits, Torx bits can also be used for certain screws. Torx bits have a six-sided star drive and come in different sizes. Testing out different sized Torx bits is important to find the one that fits snugly into the screw head. It’s important to note that Torx bits may not work for all types of screws.
Identifying Pozidriv Screws
Pozidriv screws may look like Phillips screws, but they have tapered slots in between the plus sign. Using a Phillips bit on a Pozidriv screw may cause it to slip or not grab properly. It’s important to use a Pozidriv bit for these types of screws to ensure a perfect fit. When purchasing screws, the screw type is often listed on the packaging, as well as the corresponding bit size.
Remember, choosing the right bit, lining it up properly, and applying proper pressure are all important in preventing stripped screws. If you need extra help, Tank Bond Liquid Grip can be applied to the head of a fastener to improve grip and prevent slipping.
[Guide] How To Launch Your Woodworking Business For Under $1000
Click Here To View
If you’re considering turning your woodworking hobby into a part-time business check out this helpful guide on how to get started.
Correct Angle of Attack
Getting the right angle of attack is crucial when it comes to preventing stripped screws. If the screwdriver is not lined up perfectly, it will slip off and spin in the screw, causing it to strip. This is especially common when using a drill. To avoid this, always make sure to line up the screwdriver perfectly with the screw head.
Applying the proper amount of pressure or torque is also important. Without proper pressure, the screwdriver will twist away from the screw head and start to skip, causing the screw to strip. Make sure to apply a lot of pressure directly down and use the right size bit for the job.
It’s also important to choose the right bit for the job. Always use the proper size bit for the screw head, and make sure to test it out beforehand to ensure a tight fit. Using a bit that is too small or too large will cause the screwdriver to slip and strip the screw.
If you’re having trouble getting the right angle or applying enough pressure, don’t be afraid to get a little help. Tank Bond Liquid Grip is a great product that can give you up to seven times more grip. Simply apply a drop to the head of any fastener, and it will improve the grip and prevent slipping or stripping.
By following these tips, you can prevent stripped screws and save yourself a lot of frustration. Always choose the right bit, get the proper angle of attack, apply the right amount of pressure, and use a product like Tank Bond Liquid Grip when needed.
Applying Proper Pressure and Torque
To prevent stripped screws from happening, it is crucial to apply the proper pressure and torque. LRN2DIY’s Nils shows four tips to ensure that screws do not strip.
The first tip is to use the correct size bit for the job. A screwdriver that is too sharp and pointy will slip out as soon as any torque is applied. A blunt screwdriver will do a much better job. To determine the correct size, try out a few different ones until you find the right fit.
The second tip is to get the proper angle of attack. If the screwdriver is not lined up perfectly, it will slip off and spin in the head, causing the screw to strip.
The third tip is to apply the proper amount of pressure or torque to get the job done. Without proper downward pressure, the screw will hop out and start to skip, causing it to strip.
If you need extra help, Tip number four is to use Tank Bond Liquid Grip. This product gives up to seven times more grip and can be applied to any fastener. It fills in any loose spots and helps the screwdriver get maximum grip.
Remember, these tips apply whether using a hand screwdriver, drill, or impact driver. By following these tips, stripped screws will never be a problem again.
Getting Help with Tank Bond Liquid Grip
Product Introduction
Tank Bond Liquid Grip is a product made by DAP that provides up to seven times more grip for fasteners. It comes in a small tube that can be kept near your drill or in your toolbox for easy access. Applying just a drop of Tank Bond Liquid Grip on the head of any fastener can improve its grip and prevent slipping or stripping.
Application Tips
To prevent stripped screws, it is important to choose the proper size bit for the job. Using a bit that is too small or too large can cause slipping or stripping. It is also important to line up the screwdriver properly and apply the right amount of pressure or torque to get the job done. Tank Bond Liquid Grip can be used as an extra hand to improve grip when needed.
Hearing the Grip
Applying Tank Bond Liquid Grip adds a gritty texture to the fastener, which can be heard when turning the screw. This texture helps fill in any loose spots and provides maximum grip, even if the angle is a little off.
Remember to choose the right bit, line it up properly, apply the right pressure, and use Tank Bond Liquid Grip when needed to prevent stripped screws. With these tips, DIY projects can be completed with ease and without the frustration of stripped screws.
Conclusion and Further Resources
In conclusion, Nils with LRN2DIY has shared four valuable tips to prevent stripped screws. These tips include using the proper size bit for the job, getting the proper angle of attack, applying the proper amount of pressure or torque, and using Tank Bond Liquid Grip for extra help when needed.
By following these tips, one can avoid the frustration and annoyance of dealing with stripped screws. It is important to choose the right bit and make sure it is lined up properly to avoid slipping and stripping. Applying proper pressure and using Tank Bond Liquid Grip can also help improve grip and prevent stripping.
For further resources, Nils recommends checking out his video on essential tools for homeowners, which can also serve as a great gift guide. Additionally, DAP’s Tank Bond Liquid Grip is a helpful product to keep on hand for any DIY project.