Subscribe to Ronnie’s Workshop on YouTube
Looking for a way to make some extra cash or create a unique gift for a loved one? Look no further than today’s penny-pinching project plan! With just 80 cents worth of materials and a few basic woodworking tools, you can create a stunning countertop ladder worth up to $25.
The “Art Of Woodworking” Guide Plus 40 Project Plans
Click Here to Download Your Free Copy of The “Art Of Woodworking” Guide
In this article, we’ll take you through the lumber prep steps, strip rounding and sanding techniques, safe high-angle cuts, precision angle jig usage, pocket hole process, and assembly into art. With our step-by-step instructions and humorous tone, you’ll be able to create your own towel ladder treasure in no time. And with our profit projections and plans promo, you’ll be able to turn your hobby into a profitable side hustle. So grab your saw and let’s get started!
Key Takeaways
- With just 80 cents worth of materials, you can create a stunning countertop ladder worth up to $25.
- Our step-by-step instructions and humorous tone make it easy and enjoyable to create your own towel ladder treasure.
- With our profit projections and plans promo, you can turn your hobby into a profitable side hustle.
Penny-Pinching Project Plan
This project is a perfect example of how to turn 80 cents into a $25 woodworking masterpiece. With just a few materials and some simple tools, anyone can create a tea towel ladder or countertop ladder in under an hour. This ladder can be used as a decorative piece or as a functional item in the kitchen or bathroom.
To start, the creator rips off the edge of a 2×4 and sets the saw to 3/4 inch to rip four strips. After rounding over all the corners of the strips with an 8-inch round over bed on a palm router, everything is sanded down smooth. With a jig capable of holding both boards in place, precise angles can be achieved with just one cut.
The remaining two slats are cut in half, and three of the four pieces are used in this project. Each of the three gets a pocket hole at each end, and the rungs are lined up with marks before gluing and screwing in the pocket hole screws.
The end result is a tea towel ladder or countertop ladder that can be sold for anywhere from $13 to $40. Even if one disagrees with the $25 estimate, they are still making 15 times the profit than what they started with.
The plans for these ladders and a private instruction video are available in the link below. This project is a great way to save money while also creating something beautiful and functional.
Lumber Prep Steps
He begins the project by ripping off the edge of the 2×4 and then sets the saw to 3/4 of an inch and rips four strips. After that, he rounds over all the corners of the strips with an 8 in round over bed on his palm router and sands everything down smooth.
To make these high angle cuts, he uses a jig that is capable of holding both boards in place, ensuring a precise angle on both boards with just one cut. The other ends get placed for a 13° cut to the right, while the previous 77° angle goes against the fence.
The remaining two slats are cut in half, and each of the three gets a pocket hole at each end. Since they’re 3/4 inch thick, that’s what he sets the jig to. It’s just a matter of lining up the rungs with his marks and gluing and screwing in the pocket hole screws.
The end result is a tea towel ladder or countertop ladder, which can make a great gift or can be sold for profit. With just 80 cents worth of material and under an hour of work, he was able to transform it into a piece worth 31 times that amount. Plans for these ladders, including a private instruction video on how to build them and the simple angle cutting jig, can be found in the link below.
Strip Rounding and Sanding
Our woodworking expert starts this section by ripping off the edge of a 2×4 and then setting the saw to 3/4 of an inch to rip four strips. After that, he rounds over all the corners of the strips with an 8 in round over bed on his palm router, making sure everything is smooth.
He emphasizes that this is a safe and secure way to make high angle cuts, and with a jig capable of holding both boards in place, one can get a precise angle on both boards with just one cut. He holds the blade guard up a bit to clear the toggle clamps, but his hands are nowhere near the blade.
Once the cut is made, he places the other ends for a 13° cut to the right, with the previous 77° angle going against the fence as shown. He then cuts the remaining two slats in half and uses three of the four pieces in the project.
Each of the three pieces gets a pocket hole at each end, and since they’re 3/4 inch thick, he sets the jig accordingly. He then lines up the rungs with his marks and glues and screws in the pocket hole screws.
The end result is a tea towel ladder or countertop ladder, worth around 25 bucks, which is 31 times the initial cost of 80 cents. Our expert suggests that this ladder would make a great gift or could be sold for some extra money.
For those interested in building these ladders, our expert provides plans and a private instruction video in the link below. While the ladder can be found online for anywhere from 13 to 40 bucks, our expert believes it’s worth 25, even if others disagree. Either way, the profit is significant, with a 15 times increase in profit even if the ladder is sold for half the suggested price.
Safe High-Angle Cuts
Ronnie’s Workshop demonstrates a safe and secure way to make high-angle cuts. By using a jig that holds both boards in place, he is able to get a precise angle on both boards with just one cut. He emphasizes the safety of this method, as their hands are nowhere near the blade during the cut.
To make the cuts, he starts by ripping off the edge of a 2×4 and then sets the saw to 3/4 of an inch and rips four strips. The corners of the strips are then rounded over with an 8 in round over bed on a palm router, and everything is sanded down smooth.
Once the strips are prepared, he makes a 13° cut to the right, using a jig to hold the boards securely in place. The remaining two slats are cut in half and each piece is given a pocket hole at each end. The rungs are then lined up with marks and glued and screwed in place.
The end result is a tea towel ladder or countertop ladder, which can be sold for a profit. He notes that plans for these ladders, as well as a private instruction video on how to build them and the simple angle cutting jig, are available online. He estimates the value of the finished project at around $25, which is a 31 times increase from the initial cost of 80 cents.
Precision Angle Jig Usage
He starts by ripping off the edge of the 2×4 and then sets the saw to 3/4 of an inch and rips four strips. After that, he rounds over all the corners of the strips with an 8 in round over bed on his palm router, and then sands everything down smooth. This is a safe and secure way to make high angle cuts, and with a jig capable of holding both boards in place, he gets a precise angle on both boards with just one cut.
He holds the blade guard up a bit to clear the toggle clamps, but his hands are nowhere near the blade. Once the cut is made, the other ends get placed for a 13° cut to the right, and the previous 77° angle goes against the fence as shown. He cuts the remaining two slats in half and uses three of the four pieces in this project.
Each of the three gets a pocket hole at each end, and since they’re 3/4 inch thick, that’s what he sets the jig to. It’s just a matter of lining up the rungs with his marks and gluing and screwing in the pocket hole screws. He ends up with a tea towel ladder or countertop ladder as they’re sometimes called.
He took 80 cents worth of material and in under an hour transformed it into a piece that’s worth 31 times that amount. This would make a great gift, or he could make some extra money by selling them. He puts a link below to plans for these ladders that also includes a private instruction video where he goes into much more detail on how to build these and the simple angle cutting jig.
He has seen them online for 25 bucks, but he has seen them as low as 13 all the way up to 40. That’s why he says 25. Even if someone disagrees with that and says it’s half that, they’re still making 15 times profit than what they started.
Pocket Hole Process
With just 80 cents worth of material and a few tools, anyone can create a woodworking project worth up to 25 bucks. In just under an hour, you can transform a 16in 2×4 into a tea towel ladder or countertop ladder, which can be sold for a profit or given as a gift.
To start, the edge of the 2×4 is ripped off, and four strips are cut at 3/4 of an inch. The corners of the strips are rounded over with an 8 in round over bed on a palm router, and everything is sanded down smooth.
A jig is used to hold both boards in place, allowing for a precise angle on both boards with just one cut. The other ends are then placed for a 13° cut to the right, with the previous 77° angle going against the fence.
The remaining two slats are cut in half, and each of the three pieces gets a pocket hole at each end. The rungs are then lined up with the marks and glued and screwed in with the pocket hole screws.
The end result is a safe and secure tea towel ladder or countertop ladder, which can be sold for a profit or given as a gift. Plans for these ladders, along with a private instruction video, can be found in the link below. So, what are you waiting for? Get started on your next woodworking project today!
Assembly into Art
Ronnie’s Workshop demonstrates how to turn a simple 16-inch 2×4, a few pocket hole screws, some glue, and some stain into a beautiful and functional tea towel ladder or countertop ladder. The project costs only 80 cents to build, but can be sold for up to $25, resulting in a 31 times increase from what was initially invested.
To start, he rips off the edge of the 2×4 and then rips four strips at 3/4 of an inch. The corners of the strips are then rounded over with an 8-inch round over bed on a palm router. He emphasizes that this is a safe and secure way to make high angle cuts, using a jig to hold both boards in place and get a precise angle on both boards with just one cut.
After making the first cut, the other ends of the slats are placed for a 13° cut to the right, with the previous 77° angle going against the fence. The remaining two slats are then cut in half, and three of the four pieces are used in the project. Each of the three slats gets a pocket hole at each end, and the rungs are lined up with marks before being glued and screwed in with pocket hole screws.
The result is a beautiful and functional tea towel ladder or countertop ladder that can be sold for up to $25. He provides a link to plans for these ladders and a private instruction video for building them. Whether as a gift or for extra income, this simple and affordable woodworking project is a great way to turn 80 cents into a profitable work of art.
The Big Reveal: Towel Ladder Treasure
Ronnie’s Workshop demonstrates how to build a tea towel ladder or countertop ladder using just a few materials such as a 16in 2×4, pocket hole screws, glue, and stain. The project costs only 80 cents to build but can produce a woodworking project worth around $25, which is a 31 times increase from the initial investment.
To create the ladder, he starts by ripping off the edge of the 2×4 before ripping four strips at 3/4 of an inch. The strips are then rounded over with an 8 in round over bit on a palm router, and sanded down smooth. He then uses a jig to make high angle cuts, which allows for a precise angle on both boards with just one cut.
The remaining two slats are cut in half, and three of the four pieces are used in the project. Each of the three gets a pocket hole at each end, and the rungs are lined up with marks before gluing and screwing in the pocket hole screws. The result is a tea towel ladder that can be sold for around $25, making it a profitable and fun project to build.
He notes that plans for the ladder can be found online, along with a private instruction video that goes into more detail on how to build the ladder and the simple angle cutting jig. The ladder can make a great gift or a source of extra income. Even if someone disagrees with the $25 price point, they can still make a significant profit from the project.
Profit Projections and Plans Promo
The woodworking project featured in the video is a tea towel ladder or countertop ladder that costs only 80 cents to build and can be sold for around $25. This means a 31 times increase in value from the initial cost of the materials. The project requires only a 16in 2×4, few pocket hole screws, some glue, and some stain.
The project can be completed in under an hour and is a safe and secure way to make high angle cuts. With a jig that can hold both boards in place, a precise angle on both boards can be achieved with just one cut. The ladder is made by ripping off the edge of the 2×4, then ripping four strips at 3/4 of an inch, and rounding over all the corners of the strips with an 8 in round over bed on a palm router. After sanding everything down smooth, the remaining two slats are cut in half and three of the four pieces are used in the project. Each of the three gets a pocket hole at each end, and then it’s just a matter of lining up the rungs with the marks and gluing and screwing in the pocket hole screws.
The ladder can be sold for a range of prices, from $13 to $40, but he suggests selling it for $25. Even if one disagrees with the suggested price and sells it for half that amount, they would still make 15 times profit than what they started with.
Overall, the tea towel ladder or countertop ladder is a quick and easy project that can be sold for a significant profit. It would make a great gift or a way to earn some extra money.