Subscribe to Ronnie’s Workshop on YouTube
Looking for a quick and easy way to turn scrap wood into a profitable project? Look no further than this video tutorial, which shows how to transform an 8ft 2×4 into candle holders worth $120 in just over an hour. The process involves cutting the wood into 24 pieces, angling the edges, drilling holes, rounding the edges, sanding, and staining.
While the sanding may not be the most enjoyable part of the process, the end result is sure to be satisfying. And with the potential for high profits, this small project is definitely worth a try. So grab your scrap wood and get ready to turn it into something beautiful and profitable!
Key Takeaways
- Turning scrap wood into profitable projects is easy with the right tools and techniques.
- Cutting, angling, drilling, rounding, sanding, and staining are all important steps in creating high-quality candle holders.
- With the potential for high profits, small projects like this are a great way to make the most of your scrap wood.
Lumber Economics
In this video, Ronnie’s Workshop shows how to transform an 8ft 2×4 that costs $348 in their area into a project worth $120 in just over an hour. By cutting 24 pieces of the 2×4 and using a table saw set at 30° and a drill press with a 1 and 1/2 in forstner bit, he creates unique candle holders.
He emphasizes the importance of using a stop block at 3 and 1/2 in to ensure consistent cuts and prevent waste. They also caution against not having a shot back nozzle nearby when drilling to avoid a mess.
After rounding over the sharp edges of each hole with a palm router and sanding, he applies stain to the candle holders. They compare their product to similar ones for sale, including a set of three on Wave fa for $30 and a 6-in section of 4×4 with two holes drilled out listed for $16.
Based on their calculations, he prices their candle holders at $19.99 per set of four, with the potential for high profits. This video serves as a reminder to viewers to consider the potential value of scrap wood and think creatively about turning it into profitable projects.
Cutting to Size
Setting Up Stop Block
To transform an 8ft 2×4 into a project worth $120, the first step is to set up a stop block at 3 and 1/2 in. This allows for cutting 24 pieces of the wood, leaving extra space to cut around any bad knots that might be present. After taking a little off the end to clean it up, heproceeds to cut the blocks.
Avoiding Knots
Once all the blocks are cut, Ronnie sets the table saw to 30° and the fence to 3 in, and runs each block through on all sides with the angle cuts. The next step is to use a 1 and 1/2 in forer bit to drill about a third of the way down. To avoid unnecessary shavings, he uses a shot back nozzle in the other hand while drilling. After drilling 24 blocks, he rounds over the sharp edge of each hole with a palm router using an E8 in bit. Finally, he applies some stain to the blocks to give them a finished look.
By following these simple steps, anyone can turn scrap wood into a profitable project. So, what is this project? Pause the video and write your guess in the comments before the big reveal.
Market Research
In the video, Ronnie’s Workshop demonstrates how to transform an 8ft 2×4 into a high-profit project in just over an hour. The first step is to cut 24 pieces of the wood with a stop block at 3 and 1/2 in. He then proceeds to set the table saw to 30° and the fence to 3 in to make angle cuts on all sides of the blocks. After that, he uses a 1 and 1/2 in forstner bit to drill about a third of the way down each block, using a jig to keep them centered.
He then rounds over the sharp edge of each hole with a palm router and sands the blocks. To add color, he stains four blocks and leaves the rest for future projects.
He also shows the audience screenshots of similar items for sale, such as a set of three on Wave fa for $30 and a 6-in section of 4×4 with two holes drilled out for $16. Based on the calculation of six sets of four candle holders priced at $19.99 per set, he estimates a high profit for this project.
The idea behind this type of project is to encourage viewers to think about what they can do with scrap wood laying around and turn it into a profitable venture.
Angling the Edges
Table Saw Setup
In this section, Ronnie’s Workshop demonstrates how to set up a stop block at 3 and 1/2 inches and cut 24 pieces from an 8ft 2×4. He advises that cutting 24 pieces allows for cutting around a bad knot that might be present. After cutting all of the blocks, he sets the table saw to 30° and the fence to 3 inches. Then, he runs each block through on all sides with the angle cuts on all the blocks complete.
Executing Angle Cuts
He then moves on to the drill press and sets up a jig that allows him to keep each block in place and centered while using a 1 and 1/2 inch forstner bit to drill about a third of the way down. After drilling all of the blocks, he rounds over the sharp edge of each hole with his palm router using an E8 in bit. Finally, he applies some stain to four blocks and shows screenshots of similar items for sale before revealing his finished project.
Overall, this section highlights the importance of proper table saw setup and executing angle cuts with precision. He also emphasizes the need for caution and safety when using power tools. By following these steps, anyone can transform scrap wood into a high-profit project in just a little over an hour.
Drilling Holes
Jig Setup
To start the project, the wood block is cut into 24 pieces using a stop block at 3 and 1/2 in. The table saw is set to 30° and the fence to 3 in to run each block through on all sides with the angle cuts. To ensure the blocks are centered, a jig is set up for drilling.
Drill Press Operation
A 1 and 1/2 in forstner bit is used to drill about a third of the way down each block. A shot back nozzle is kept close by to manage the shavings. The sharp edge of each hole is rounded over with a palm router using an E8 in bit.
Shavings Management
To avoid the hassle of cleaning up shavings, the nozzle of the shot back is kept close by. Without it, the amount of shavings to clean up after drilling 24 blocks would be overwhelming.
This project involves creating candle holders out of scrap wood, which has a high-profit margin. The video demonstrates how to transform an 8ft 2×4 into a project worth $120 in just over an hour. Watching the footage of drilling a hole in the block is satisfying, and the creation comes to life through a somewhat clean and efficient process. The video also showcases the importance of being cautious and safe, especially when using a palm router.
Rounding Edges
In this video, the creator shows how to transform an 8ft 2×4 piece of wood into a profitable project worth $120 in just over an hour. After cutting 24 pieces of the wood, the creator sets the table saw to a 30° angle and runs each block through, completing angle cuts on all sides. Next, the creator uses a 1 and 1/2 in for forer bit to drill about a third of the way down each block, using a jig to keep each block in place and centered.
To round over the sharp edges of each hole, the creator uses an E8 in bit on a palm router. After sanding, the creator applies stain to four blocks, with plans to use other colors in the future. The final product is a set of four candle holders, priced at $19.99 each.
The creator showcases similar items for sale, including a set of three on Wave fa for $30 and a 6-in section of 4×4 with two holes drilled out for $16. By utilizing scrap wood and some simple tools, anyone can create a profitable project like this one.
[Guide] How To Launch Your Woodworking Business For Under $1000
Click Here To View
If you’re considering turning your woodworking hobby into a part-time business check out this helpful guide on how to get started.
The Sanding Saga
After completing the drilling process, the next step in creating the candle holders is sanding. As Ronnie in the video mentions, sanding can be a tedious and time-consuming process, but it is a necessary step in creating a smooth and polished final product.
To sand the blocks, he uses a sanding block and sandpaper to smooth out any rough edges and imperfections. This process can take some time, as each block needs to be sanded on all sides and the holes need to be smoothed over as well.
While sanding may not be the most enjoyable part of the process, it is a crucial step in creating a high-quality product that customers will be willing to pay for. After all, no one wants to purchase a candle holder that is rough and splintery to the touch.
Once the sanding is complete, he moves on to staining the blocks. However, before revealing the final product, he shows screenshots of similar items for sale online. These items range in price from $16 for a simple 6-inch section of 4×4 with two holes drilled out, to $25 for five 1-inch slices of 4×4 with a hole for candles.
Based on these prices, he calculates that they can sell six sets of four candle holders for $19.99 each, resulting in a profit of $480 for just over an hour of work. This demonstrates the potential for small cost, high-profit projects using scrap wood.
Overall, the sanding process may not be the most exciting part of creating candle holders from scrap wood, but it is a necessary step in producing a high-quality product that customers will be willing to pay for.
Staining Samples
After cutting 24 pieces of 2×4 wood, rounding the edges with a table saw, and drilling a hole in each block, it’s time to add some color. In the video, Ronnie’s Workshop uses a dark stain on four of the blocks to create a sample of the finished product. However, he mentions that they haven’t decided on the other colors they want to use.
To give an idea of the potential profits of this project, he shows screenshots of similar candle holders for sale online. One set of three candle holders made from a more expensive wood is listed for $30, while a single 6-inch section of 4×4 with two holes drilled out is listed for $16. Another listing offers five 1-inch slices of 4×4 with a hole for $25.
He calculates that they could sell six sets of four candle holders, priced at $19.99 per set, for a total of $479.76. This demonstrates the potential for small projects with high profits, using scrap wood that might otherwise go to waste.
Pricing Breakdown
In this project, he transforms an 8ft 2×4, which costs $348 in their area, into candle holders that are worth $120 in just over an hour. The project involves cutting 24 pieces of the 2×4, running each block through a table saw set at a 30° angle, drilling a hole in each block using a 1 and 1/2 in forstner bit, rounding over the sharp edges of each hole with a palm router, sanding, and staining.
He mentions that similar items are being sold online for various prices. For example, a set of three candle holders without beveled edges made of a more expensive wood is being sold for $30 on Wave fa. Another listing features a 6-in section of 4×4 with two holes drilled out for $16. Five 1in slices of 4×4 with a hole are being sold for $25.
Based on Ronnie’s calculations, six sets of four candle holders priced at $19.99 each would result in a profit of $479.76. This project demonstrates how scrap wood can be transformed into high-profit items with a little creativity and effort.
Want To Improve Your Woodworking?
Discover 1,000 Hours Of Step-By-Step Woodworking Videos
It’s called Woodwork101. A database of detailed videos and blueprints in crystal clear, mouth-watering HD that will take you by the hand and show you that DIY home projects done the right way are easy, fun, and always of top quality… turning dream into reality in a heart-beat. Getting you that perfect build each and every time.
Final Reveal
After all the drilling, sanding, and staining, the big reveal is finally here. The project that started as an 8ft 2×4 worth $348 has now been transformed into a set of candle holders that can be sold for $19.99 per set. Using the techniques shown in the video, anyone can create these candle holders in a little over an hour and turn a small cost investment into a high-profit return.
The candle holders are made from 24 blocks of wood, each cut to 3 and 1/2 inches with 30° angle cuts on all sides. A 1 and 1/2 inch forstner bit is used to drill a hole a third of the way down in each block, and the sharp edges of each hole are rounded over with a palm router. Finally, the blocks are sanded and stained to the desired color.
Similar items are being sold online for various prices, ranging from $16 for a 6-inch section of 4×4 with two holes drilled out to $30 for a set of three candle holders without beveled edges. However, the candle holders made using the techniques in this video are unique and have a high-profit potential.
So, next time you have some scrap wood lying around, think about what you can create with it. With a little creativity and some basic woodworking skills, you can turn a small investment into a profitable project.
Bonus Tips
Now that you have learned how to create beautiful candle holders from scrap wood, here are some bonus tips to help you maximize your profits and make the most out of your time and resources.
- Experiment with different types of wood: While the tutorial uses 2x4s made of fur, you can try using different types of wood such as oak or cherry to create unique and high-end candle holders that can fetch a higher price.
- Offer customization options: Consider offering customization options such as different stain colors or personalized engravings to attract more customers and increase your sales.
- Sell in sets: Instead of selling individual candle holders, consider selling them in sets of two, four, or six to increase your revenue and make your products more appealing to customers looking for a complete set.
- Use social media: Utilize social media platforms such as Instagram and Facebook to showcase your products and reach a wider audience. You can also use these platforms to take custom orders and interact with customers.
- Repurpose scrap wood: Don’t let any scrap wood go to waste! Use leftover wood to create other small projects such as coasters, picture frames, or even small furniture pieces.
By following these bonus tips, you can turn your scrap wood into profitable and unique creations that customers will love. Happy crafting!