Subscribe to WhosTheVoss on YouTube
In today’s world, nearly everyone has a smartphone on hand. But what if you could turn a common 2×4 into a profitable accessory for these devices? With just a few basic tools and a little creativity, you can create a phone speaker amplifier that not only works but could earn you more than the salary of a U.S. Governor! In this blog post, we’ll walk through the step-by-step process of crafting this cool project, including how to turn a $3 construction-grade 2×4 into an item you could sell for big profit.
Key Takeaways:
- You can turn a simple 2×4 into a phone speaker amplifier.
- The project requires basic tools like a cordless drill, miter saw, and a 2×4.
- By selling just a few amplifiers each day, you could make over $70,000 per year, which is more than the salary of the U.S. Governor of Maine.
- The plans for the project are free and easy to follow, making it a perfect DIY for anyone interested in woodworking.
Step-by-Step Guide to Building the Phone Speaker Amplifier
Start by grabbing a 2×4, your cordless drill, and a miter saw. The first step is trimming off any rough or uneven edges from your 2×4. You’ll want a smooth surface to begin working with. Once that’s done, find a piece of scrap wood the same thickness as your 2×4, and secure it to your miter saw’s fence. This will help with the precision of your cuts.
Next, mark a 3/4-inch line down the end of your 2×4. You can use a turn knob or screw, or even voice commands on some high-tech miter saws, to limit the blade’s depth to the 3/4-inch mark. From there, measure and mark down the length of the 2×4 with specific measurements: 3 inches, then 5/8 of an inch, followed by 1 3/8 inches. These marks will serve as a guide for your cuts, which should be done using your square for perfect 90-degree lines. Add a little squiggle to the thinner 5/8-inch lines for a visual cue.
After you’ve marked everything, slide the board into the jig and align your blade with the squiggled line. Carefully make your cuts, ensuring that your material stays securely in place against the fence. The jig allows the blade to travel through the entire board without leaving any gaps.
Once your jig is removed, reset the blade to full depth, and cut the remaining pieces based on the lines you’ve marked. With all the grooves cut into the board, it’s time to move to the next step: drilling.
At the end of the longest part of your 2×4, draw an “X” and grab your drill with a 1-inch forstner bit. Drill down until you reach the groove. This will form the pocket where your phone will rest, amplifying the sound. After drilling, sand down your project to smooth out any rough edges or imperfections.
Now for the fun part – assembling the phone holder! Place your phone into the groove, and you’ll see that this simple 2×4 is now a working phone speaker amplifier. It fits most phone sizes, but for larger phones, you may need to make a custom-sized groove.
Making Money with Your New Creation
Once your phone amplifier is complete, you’re ready to make some money! These unique amplifiers are not only functional but can be sold for a great profit. With a simple design and minimal material costs, you could easily sell four of these each day for a total of $70,000 in a year, which is equivalent to the salary of a U.S. Governor. In fact, the Governor of Maine makes $70,000 per year, and some even refuse their salary or take as little as a $1 payout. This means that by selling just one amplifier, you’re already earning more than the Governor of Maine.
Woodworking has taken a downturn on YouTube, with many videos skipping over crucial details, but with this project, you get step-by-step plans, free of charge, to help you succeed. Not only will you have a cool, custom phone speaker amplifier, but you could also turn this simple project into a profitable side business. So, grab your 2×4, drill, and miter saw, and get started on creating something both functional and profitable today!