7 CLEVER Picture Hanging Tricks Everyone Should Know


The speaker in the video shares seven clever picture hanging tips that everyone should know. From using toothpaste for accurate nail placement to tackling picture collages or galleries, the tips cover a range of scenarios and offer practical solutions. The video provides step-by-step instructions for each tip, making it easy for viewers to follow along and implement the tips in their own homes.

Subscribe to LRN2DIY on YouTube

Key Takeaways

  • The video shares seven practical and clever picture hanging tips.
  • The tips cover a range of scenarios, from using toothpaste for accurate nail placement to tackling picture collages or galleries.
  • The video provides step-by-step instructions for each tip, making it easy for viewers to follow along and implement the tips in their own homes.
Popular ArticlesFun Woodworking Trivia Quiz
3 Ways To Build Floating Shelves9 Scrap Wood Projects That Sell
21 Pallet Wood Projects5 Small Woodworking Tools Every Woodworker Can Use
174 Woodworking Tips And Tricks12 Tools Under $20 Every Woodworker Needs
Glue Squeeze Out Clean Up Trick Everyone Should Know20 Scrap Wood Project Ideas
25 Table Saw Jigs6 DIY Charcuterie Board Build Projects
8 Uses For Thin Strips Of Scrap WoodTable Saw Accessories
99% Of Woodworkers Don’t Know These 5 Tips and TricksSmall Projects That Sell

Clever Picture Hanging Tips

When it comes to hanging pictures, it can be a daunting task to get them level and in the right spot. Fortunately, there are some clever tips that can make the process much easier. Here are some of the best picture hanging tips:

Tip #1: Tackling picture collages or galleries can be a challenge, but there are ways to make it easier. One approach is to use gift wrap or butcher paper to create a layout of how you want the pictures to look on the wall. Trace the outlines of the frames onto the paper and mark where the nails should go. Then, transfer the marks to the wall and drive the nails in. Once the nails are in place, you can remove the paper and hang the pictures.

Tip #2: Using a cereal box and a thumbtack, you can create a DIY picture hanging tool that works just as well as store-bought options. Cut a piece of cardboard from a cereal box and poke a hole in it with a thumbtack. Hang the picture on the hook and use the cardboard to mark where the nail should go.

Tip #3: When hanging pictures with wires that won’t catch on the nail, try using a fork to create a hook. Place the fork on the nail or screw and use it to catch the wire as it slides down.

Tip #4: Painter’s tape can be a helpful tool when hanging pictures, especially for creating straight lines and ensuring level placement. Use a length of tape to cross the two areas that need to be mounted, then mark where the nail should go.

Tip #5: To prevent making a mess when driving drywall anchors, use painter’s tape, a sticky note, or an envelope to catch the dust. Place the tape or paper under the spot where you’ll be drilling the hole, then remove it and drive the anchor in.

Tip #6: Command strips can be a great option for hanging pictures without leaving any damage on the wall. Clean the surface of the wall and the back of the picture frame with alcohol, then attach the strips in pairs. Stick the frame to the wall and press firmly, then wait an hour before reattaching the frame.

Tip #7: Toothpaste can be a helpful tool for hanging pictures with small hooks that are difficult to measure. Put a small dab of toothpaste on the hook and press it against the wall. Hold the picture with one hand and use a level to ensure it’s straight, then mark where the nails should go.

By using these clever picture hanging tips, you can make the process much easier and ensure that your pictures are hung straight and securely.

Tip 7: Using Toothpaste for Accurate Nail Placement

When it comes to hanging pictures, getting the exact right measurement for where to put your nails can be a challenge. However, with some toothpaste, this task can become much easier. To use toothpaste for accurate nail placement, start by applying a small dab of toothpaste on the back of the hook. Make sure to use a toothpaste color that contrasts with the wall color to make it easier to see.

Next, hold the picture with your left hand on the bottom and place a level on top to ensure that the picture is straight. Once the picture is level, press it against the wall so that the toothpaste on the back of the hook leaves a mark on the wall where the nail should go. Repeat this process for the other hook.

After making the marks, remove the picture hooks and make sure they are clean. Then, line up one of the hooks with its corresponding mark on the wall and press it against the wall. Repeat this process for the other hook, making sure that the hooks are level.

Using toothpaste for accurate nail placement is a simple and effective way to ensure that your pictures are hung straight and in the right position. By following these steps, you can save time and avoid the frustration of having to reposition your pictures multiple times.

Tip 6: Using Command Strips for Damage-Free Hanging

When it comes to hanging pictures, one of the biggest concerns is damaging the wall behind it. But with command strips, you can hang your pictures without leaving any marks behind.

First, make sure your picture frame has had the mounting hardware removed, so you have a clean surface. Then, clean both the picture frame and the wall with alcohol on a paper towel.

Next, put your command strips together in pairs and lock them in place. Remove the backing from one at a time and place them on the wall, making sure everything is level before sticking them on.

Here’s a tip that many people don’t know: remove the picture right away after sticking it to the wall and push the command strips against the wall for 30 seconds. Then, wait an hour for the adhesive to fully set and cure onto the wall. After an hour, put the picture back on, and it should click into place.

When you’re ready to remove the picture, it comes off damage-free. Just start from the bottom, pull it off, and remove the command strips by pulling down on the tab slowly.

Using command strips for damage-free hanging is an excellent way to hang pictures without worrying about damaging your walls.

Tip 5: Mess-Free Drywall Anchors

When it comes to hanging pictures, it’s important to have the right tools and techniques to ensure that the job is done correctly. One common issue when hanging pictures is making a mess when driving drywall anchors. Fortunately, there are three methods that can help prevent this problem.

The first method involves making a little catch out of painter’s tape. Simply place the tape on the wall where you plan to drill the hole and fold it up to create a little pocket. This will catch any dust or debris that falls as you drill the hole.

Another method is to use a sticky note. Place the note on the wall where you plan to drill the hole and fold it up to create a little pocket. You can also add wings to the note to help catch any debris.

The third method involves using an envelope with a bit of painter’s tape on it. Simply place the envelope on the wall where you plan to drill the hole and the tape will catch any debris that falls.

By using one of these methods, you can drive your drywall anchors in with less mess and ensure that your picture hanging job is clean and professional-looking.

Tip 4: Using Painters Tape for Tricky Layouts

Painters tape can be an extremely helpful tool when hanging pictures, especially for tricky layouts. It is especially useful for power strips, but can also be used for hanging pictures. To use painters tape, grab a length of it that crosses the two areas that need to be mounted. Make sure the hooks are in the right position and then place the painter’s tape at the very top of the hooks. Use a marker to mark where the nail needs to go in order to get the picture perfectly level when you hang it up.

This can serve as a line for leveling, ensuring the picture is perfectly level when you hang it up. Once you have marked the spots, use the tape to put the picture exactly where you want it. Then, remove the tape and you’re ready to hang.

If you’re looking for a more advanced technique, you can use a laser level to ensure that the tape is perfectly straight. This will help you to ensure that your pictures are perfectly level and straight, making for a more professional-looking display.

Overall, using painters tape is a simple and effective way to ensure that your pictures are perfectly level and straight. It’s a great tool for anyone who wants to create a professional-looking display of their pictures and artwork.

Tip 3: Using a Fork for Wire Catching

Another useful tip for hanging pictures is using a fork to help out when the wire just won’t catch on the nail. Sometimes, when trying to hang a picture, the wire won’t grab the nail properly, and it can be frustrating to get it just right. In such a case, a fork can be used as a little hook to catch the wire as it slides down.

To use this technique, place a fork on the nail or the screw that you’re using and use that as a little hook to catch the wire. Once the picture or mirror is in place, just remove the fork, and the problem is solved.

This technique can be especially helpful when dealing with heavier pictures or mirrors that need a more secure hold. By using a fork to catch the wire, you can ensure that the picture is hung straight and secure without any frustration or hassle.

In addition to using a fork, mounting putty can also be used on anything that swivels or swings to keep it in place. By using these simple tips, you can hang pictures and mirrors easily and efficiently without any damage to your walls or frustration.

Bonus Tip: Using Mounting Putty for Swiveling Pictures

Another useful tip for hanging pictures is to use mounting putty on anything that swivels or swings. This putty is a moldable adhesive that can be used to stick objects to surfaces without causing any damage to either the object or the surface.

To use mounting putty, simply take a small amount and roll it into a ball. Then, press the ball onto the back of the picture where it swivels or swings. Next, press the picture onto the wall in the desired location and adjust it as needed. The putty will hold the picture in place, preventing it from moving or swiveling.

Mounting putty is particularly useful for hanging pictures in areas that are prone to vibrations or movement, such as near a door or window. It can also be used to hang pictures on uneven surfaces or walls with a rough texture, where other hanging methods may not work as well.

Overall, mounting putty is a great solution for anyone who wants to hang pictures without causing any damage to their walls or their pictures. It is easy to use, affordable, and can be found at most hardware or home improvement stores.

Tip 2: Using a Cereal Box for Perfect Nail Placement

Another great tip for picture hanging is to use a cereal box to ensure perfect nail placement. This method is an easy and cost-effective way to create your own picture hanging tool.

To create this tool, simply cut a piece of the thicker card stock material from a cereal box and trim off the ends. Then, cut a little tab on the bottom so that it fits inside your hooks. Use a basic push pin to poke a hole in the tab and then place it underneath your picture hook. Once you have your picture where you want it, give it a little push to create a mark where the nail needs to go.

This method is a great alternative to buying expensive picture hanging tools and allows you to customize it to fit your needs. If you’re hanging a heavier picture, you may want to double or triple up on the cereal box material to ensure it’s strong enough to hold.

Overall, using a cereal box for perfect nail placement is a simple and effective way to ensure your pictures are hung exactly where you want them.

Tip 1: Handling Picture Collages or Galleries

When it comes to hanging picture collages or galleries, it can be a daunting task. However, there are a few tips and tricks to make the process easier and less stressful.

First, use gift wrap or butcher paper to lay out the pictures in the way you want them to be on the wall. Trace lines on the paper to mark the placement of each picture. Once you have the layout set, remove the pictures and set the paper aside.

Next, use a straight edge to draw a line across the wall where you want the top of the collage or gallery to be. This will serve as a reference for level.

Use any of the methods previously mentioned to mark where the nail should go for each picture. For example, you can use toothpaste to mark the spot.

Take the layout over to the wall and use the line you drew earlier to make sure the pictures are level. Then, drive the nails through the layout and hang the pictures in their designated spots.

Once you are finished, simply rip down the paper. This method will help ensure that your picture collage or gallery is perfectly spaced and level.

By following these steps, you can tackle the beast that is picture collages or galleries with ease and confidence.

Recommended Posts:

woodworking resources

Kevin Nelson

I will always have a special place in my heart for woodworking. I have such fond memories working on projects with my parents on the weekends in the garage growing up. We built tables, shelves, a backyard shed, 10' base for a water slide into the pool, 2 story fort playhouse with a fire pole, and so much more. This woodworking blog allows me to write helpful articles so others can enjoy woodworking as much as we have.

Recent Posts

STOP Making Out-Dated Table Saw Sleds, Do This Instead