Table Saw Accessories

Woodworking Jokes

The members of the wood club were all getting on in years. At the annual Christmas dinner at Denny’s, there were now more widows than woodworkers. And the old guys left could hardly remember anything.

Just before he stood up to make his address, the president had an idea. He and the wife had been in a furniture store earlier in the day and he had seen an unusual wood species, but he couldn’t quite recall what it was. He turned to the treasurer.

“What do you call those fancy red flowers that fellers give to girls?” he asked.

“Um… roses?”

“Yes, that’s it!”

The he looked over at his wife.

“Rose, remember that store we were in today?”

Click here for more woodworking jokes.

Woodworking Meme

Click here for more woodworking memes.

A table saw is a woodworking tool that can be used to make precise, accurate cuts. However, in order to get the most out of your table saw, you need to have the right accessories. In this blog post, we will discuss some of the most important table saw accessories and what they are used for. We will also provide tips on how to choose the right accessories for your needs.

Popular ArticlesFun Woodworking Trivia Quiz
3 Ways To Build Floating Shelves9 Scrap Wood Projects That Sell
21 Pallet Wood Projects5 Small Woodworking Tools Every Woodworker Can Use
174 Woodworking Tips And Tricks12 Tools Under $20 Every Woodworker Needs
Glue Squeeze Out Clean Up Trick Everyone Should Know20 Scrap Wood Project Ideas
25 Table Saw Jigs6 DIY Charcuterie Board Build Projects
8 Uses For Thin Strips Of Scrap WoodTable Saw Accessories
99% Of Woodworkers Don’t Know These 5 Tips and TricksSmall Projects That Sell

Top 4 Table Saw Jigs & Accessories: How to Make Them

Subscribe to Pask Makes on Youtube

What Is The Most Important Table Saw Accessory?

The most important table saw accessory is the fence. The fence is what helps you make accurate cuts. When it comes to fences, there are two main types: standard and T-style. A standard fence is adjustable so that you can make precise cuts, while a T-style fence is fixed in place.

Another important table saw accessory is the miter gauge. The miter gauge helps you make angled cuts. It attaches to the table saw and allows you to adjust the angle of the blade. There are also several different types of miter gauges, including sliding and non-sliding models.

Other important table saw accessories include:

– riving knife

– blade guard

– anti-kickback pawls

– dust collection system.

These are just a few of the most important table saw accessories. Be sure to research which ones will work best for your needs. Table saws can be a great addition to any woodworking shop, but they can also be dangerous if not used correctly.

Want To Improve Your Woodworking?

Discover 1,000 Hours Of Step-By-Step Woodworking Videos

Click Here To View

It’s called Woodwork101. A database of detailed videos and blueprints in crystal clear, mouth-watering HD that will take you by the hand and show you that DIY home projects done the right way are easy, fun, and always of top quality… turning dream into reality in a heart-beat. Getting you that perfect build each and every time.

Table Saw Accessories, Sleds, And Sleeves

Subscribe to on Youtube

What Is A Stop Block On A Table Saw?

A stop block is a simple, yet essential piece of equipment for any table saw. It is used to limit the length of cut that can be made on a board, and helps ensure accuracy when making repeated cuts. There are several types of stop blocks available, but the most common is the rip fence type. This style attaches to the rip fence on the table saw and allows you to set a precise distance from the blade.

Another type of stop block is the miter gauge variety. This style attaches to the miter gauge slot on the table saw and allows you to set a precise angle for your cuts. It is important to use a stop block when making angled cuts, as it will help ensure that the cuts are accurate.

[Video] 3 Most Common Mistakes
When Setting Up Shop

Click Here To View

A woodworking friend of mine shared this video by Ralph Chapman with me that helped him set up his workshop. 

The video explains the benefits of Ralph Chapman’s guide about setting up an affordable workshop and avoiding the most common mistakes offers to anyone interested in woodworking.

5 Table Saw Tools To Up Your Game

Subscribe to izzy swan on Youtube

What Is A Table Saw Featherboard?

A table saw featherboard is an accessory that helps keep the material against the fence and blade during cutting. This is especially important when making thin or delicate cuts, as it helps to ensure a straight cut. Table saw featherboards are adjustable, so they can be made to fit any width of cut. They are also easy to attach and remove, making them a convenient addition to any table saw.

There are several different types of table saw featherboards available on the market. The most common type is the adjustable featherboard, which can be easily adjusted to fit any width of cut. Another type of table saw featherboard is the non-adjustable featherboard, which is fixed in size and cannot be adjusted. This type is typically less expensive than the adjustable featherboard, but it may not be suitable for all cuts. Finally, there is the finger-jointed featherboard, which is a custom-made featherboard that is designed to fit a specific width of cut.

Top 10 Woodworking Table Saw Jigs and Accessories & How To Make Them

Subscribe to Chris Salomone on Youtube

What Side Should The Fence Be On A Table Saw?

When it comes to the fence on a table saw, you have two options: the left side or the right side. So which one should you choose?

Well, it depends on what you’re using your table saw for. If you’re using it for general woodworking projects, then the fence should be on the left side so that the wood is pushed towards the blade. This makes it easier to cut pieces of wood that are wider than the saw itself.

However, if you’re using your table saw for more specific projects, like making miter cuts, then the fence should be on the right side so that the wood is pushed away from the blade. This makes it easier to make accurate cuts.

Click Here For Woodworking Resources

STOP Making Out-Dated Table Saw Sleds, Do This Instead